When it comes to balancing budget and performance, I prefer Shark irons.
Shark Ninja has consistently exceeded their customers’ expectations by improving their product quality over time.
Whether you need a specific type of iron, the Shark brand has got you covered.
In this article, we will guide you in choosing the best Shark iron for professional use that is available online, along with its pros and cons.
Best Shark Irons
- Shark GI435 Professional Electronic Iron.
- Shark GS500 Professional Portable Garment Steamer.
- Shark GI510 Professional Steam Iron with Auto-Shut Off.
- Shark GI405 – Professional Steam Power Iron.
- Shark GI468 – Lightweight & Professional Iron
Best Shark Iron: Shark GI435
When it comes to power and performance, you can’t get much better than the GI435 model, thanks to its innovative X-Tended Steam Burst feature.
With it, you will be able to remove wrinkles from any fabric without stressing yourself out.
The Intelligent Electronic Control feature helps to control the steam and heat setting for your fabrics while protecting and extending their life.
When it comes to power, it has a power rating of 1600 watts which is enough when compared to other irons in this price range.
It comes with a stainless steel soleplate and has other useful features including anti-drip, auto-shutoff, etc.
Features:
- Power: 1600 W
- Water Tank: not disclosed
- Heat-up time: 2 min
- Steam time: 15 mins
- Weight: 4.04 pounds.
Pros:
- Lightweight, easy to use.
- Intelligent Electronic Control for optimal heat distribution
- 9″ stainless steel soleplate.
Cons:
- The plastic cover is of low quality.
- No manuals or proper guidance about using the iron.
Another brand that I recommend is Rowenta. You can check out the best Rowenta iron buying guide here.
Best Shark Steamer: Shark GS500
Looking for a Shark handheld garment steamer, this GS500 model is going to do the job for you.
If you travel a lot and want a fully customizable clothes steamer, then this model is worth checking out.
Another perk of this model is the Vertical Press Pad, which allows you to steam your garments from an upright position, creating a virtual ironing board for superior results quickly and efficiently.
You can steam 3-4 shirt-size garments before refilling. This Garment steamer can be used to kill bed bugs, while it kills 99.99% bacteria & bed bugs (but I found it can remove odors from your garments pretty easily.)
Features:
- Power: 1580 W
- Water Tank: 200ml.
- Heat-up time: 1 min
- Steam time: 15 mins
- Weight: 3 lbs.
Pros:
- Premium quality materials.
- You don’t need an ironing board to use it.
- Lightweight.
Cons:
- Not budget-friendly, costlier than average products.
Shark Iron with auto-shutoff: Shark GI510
The Shark Professional GI510 is a heavy-duty laundry iron that can effectively cater to the ironing needs of every household.
It is powered by 1800 watts and is made from premium aluminum.
The power of 1800 watts should be matched with a larger water tank and less heating time. It has a water reservoir of 400 ml also it takes 45 seconds to fully heat up.
Pro tip: Iron your clothes in an orderly fashion. Group them according to their fabric types and gradually increase the heat of the iron.
Features:
- Power: 1800 Watt.
- Water Tank: 400ml.
- Heat-up time: 45 sec.
- Steam time: 25 mins
- Weight: 4 lbs.
Pros:
- It is powerful and can be used to iron heavy fabric.
- Its soft-touch grip makes it easy to use.
- It comes with a 12-foot cord.
- The water tank is larger than most of the items on this list.
Cons:
- It should be cleaned very thoroughly.
- Leaving water spot after using it for 1 year.
Shark iron for quilting: Shark GI405
If you’re looking for the perfect shark iron for quilting then this GI 405 model is worth the price.
Though the price may surprise you rest assured they work like a charm. I’ve bought one for myself, and while I wanted to spend less it has the functionality of a standard iron.
It comes with a 1600 watts power with auto shutoff & stainless steel soleplate. But I liked the self-cleaning function the most. At this price range, it was unbelievable.
Features:
- Power: 1600 Watt.
- Water Tank: 250ml.
- Heat-up time: 45 sec.
- Steam time: 25 mins
- Weight: 3.5 lbs.
Pros:
- It’s easy to use.
- It comes with a self-cleaning function.
- The water tank is smaller compared to most of the items on this list.
Cons:
- It should be cleaned very thoroughly.
You can read our article on shark irons troubleshooting guide which is helpful for a beginner.
Recommendation: Shark GS500 is our favorite model.
How to use a shark iron?
- Open the water inlet cover located on the front of the iron.
- Holding the iron at a slight angle; fill the tank with the filling flask without going over the “MAX” line. Close the water inlet cover.
- Plug in the iron.
- Choose dry or steam ironing based on the type of fabric you are going to iron. For DRY ironing set the steam control dial to “0”. For STEAM ironing set to desired steam for the type of material to be ironed.
- Set the desired fabric/temperature by pressing the Electronic Temperature Control on the top of the handle.
- The temperature indicator light on the LED Display Panel will flash as the iron reaches the preset temperature.
- Allow approximately 2 minutes for the iron to heat up or cool down to the new temperature setting.
Shark Iron GI435 Unboxing Video
Auto-shutoff feature of Shark Irons
Shark Irons are equipped with an electronic auto-off feature. The electronic auto-off switches the iron off if it has been unmoved in any position (sideways, flat or upright) for approximately 7-9 minutes.
The auto-off light will turn red on the LED display panel when the iron switches off.
To turn the iron back on, just gently rock the iron back and forth several times until the “Power ON” light is re-illuminated.
Press the Electronic Temperature Control to reset the temperature to the desired setting. The iron might have to warm up for a minute if the auto-off feature was activated for an extended time.
How to empty a Shark iron water tank?
- Always empty the water in the iron after each use.
- When you have finished ironing, turn the variable steam control lever to “0” and press the electronic temperature control button until the power light is lit.
- Unplug the iron from the electrical outlet.
- Turn the iron upside down over the sink with the tip pointing downward and allow the water to flow from the opening. Be cautious when emptying, don’t touch hot surfaces, water or steam because injury may occur.
- Place the iron upright and allow to cool before storing.
How to self clean a Shark Iron?
- Set the steam control lever to any steam position.
- Fill the water tank up to the “MAX” level. Do not overfill.
- Stand the iron on its heel, standing up on a protected surface and plug into the electrical outlet.
- Press the Electronic Temperature Control button to “•••” setting. Wait until the iron heats up and the Temperature Indicator lights up.
- Hold the iron horizontally over the sink. Turn the steam control lever all the way to the right to the SELF CLEAN position.
- Move the iron back and forth. Hot water and steam will now be ejected from the holes in the soleplate. Use caution when doing this as the water and the steam are hot enough to cause burns. The impurities and scale are washed away.
- Continue moving the iron back and forth until all the impurities are flushed.
- Empty the water tank as described above. Don’t touch the hot surfaces, water or steam because injury may occur.
- Turn the Steam Control Lever to “0” position when the water tank is empty
- Place the iron back upright on its heel to cool down before storing.
How to store a Shark Iron?
- Always turn the variable steam control to “0” after you have emptied the water tank.
- Allow the iron to cool down.
- Always store the iron in the upright position to protect the soleplate.
- Every two weeks, clean the exterior of the iron with a damp cloth and wipe dry.
- If you use spray starch, wipe the soleplate with a soft, damp cloth after every use before unplugging. Please be careful if the iron is hot when cleaning the soleplate.
- If the iron hasn’t been used in a few weeks, hold the iron horizontally and allow steaming for 2 minutes before ironing.